Tips To Keeping Your Rotogravure Cylinder in Shape for Long

Tips To Keeping Your Rotogravure Cylinder in Shape for Long

For long-term normal use of the rotogravure cylinder, you need to ensure it is kept safe. This means making sure that the cylinder is properly used and maintained. Otherwise, misusing it means that you will be exposing it to a high rate of wear and tear. But how do you keep your rotogravure cylinder safe for long?

First, it is important to note that the longevity of the rotogravure cylinder is determined by maintenance. If thorough maintenance is being carried out, then you will definitely enjoy these machines for a long time.

There are many ways to keep your rotogravure cylinder in perfect shape and safe for longer. If you are new in this industry, here are some of the key things that you need to do:

Proper Use

The application of the rotogravure cylinder should always be the first thing. You need to consider a number of things about the use of these cylinders. First is where it is being used. You must ensure the cylinder is being used in the right unit and for the right printing. Otherwise, you might have a problem with a high rate of wear and tear, especially if the conditions are rougher.

So make sure the cylinder is being used as recommended by the manufacturer. That’s one of the best ways that you can keep the machine in perfect conditions.

Maintenance

The other way you can keep your rotogravure cylinder is safe for long use is maintenance. The machine should be maintained as recommended by an expert or by the manufacturer. Make sure that you are observing all the maintenance tips as provided.

Proper maintenance should include the cleaning of the rotogravure cylinder after you are done with the printing. This should be done immediately to avoid the reaction of ink with the cylinder surface material. You must also ensure that you have the right cleaning agents because some might be damaging.

Storage

The last thing is the storage of the rotogravure cylinder. After you have cleaning the cylinder, you need to dry it thoroughly and then apply some oil or lubricant to it. This is an important factor to consider because it helps to prevent water or moisture problems such as rusting.

After lubrication, wrap it with a film such as PET film. Then make sure that the rotogravure cylinder is stored vertically with one side resting in the wall. If too heavy or space is an issue, wrap it and store it horizontally on the floor or any other place.

With these tips, you’ll be able to keep your rotogravure cylinder in perfect shape for a long.

Leave a Reply

Your email address will not be published. Required fields are marked *